HDCVR
- 66 -
Figure 3-67
Account
Here is for you to implement account management.
Add new user
Modify user
Add group
Modify group
Modify password
For account management please note:
For the user account name and the user group, the string max length is 6-byte. The backspace infront of
or at the back of the string is invalid. There can be backspace in the middle. The stringincludes the valid
character, letter, number, underline, subtraction sign, and dot.
The default user amount is 64 and the default group amount is 20. System account adopts
two-levelmanagement: group and user. No limit to group or user amount.
For group or user management, there are two levels: admin and user.
The user name and group name can consist of eight bytes. One name can only be used once.
There are four default users: admin/888888/666666 and hidden user “default”. Except user 6666,
other users have administrator right.
Hidden user “default” is for system interior use only and can not be deleted. When there is no loginuser,
hidden user “default” automatically login. You can set some rights such as monitor for thisuser so that you
can view some channel view without login.
One user should belong to one group. User right can not exceed group right.
About reusable function: this function allows multiple users use the same account to login.
About user account and MAC. When you add a new user, you can input the MAC address of currentuser.
Only the user of the same MAC address can access the device remotely.(MAC address is forthe device
of the same LAN.) If you leave MAC address item in blank when you add a new user, theuser of any MAC
address can access the device remotely. You can set or change MAC addresswhen you add or modify a
user. The MAC address function is also valid for PSS login.
Please notecurrent function does not
support IPV6.
After all the setups please click save button, system goes back to the previous menu
