HDCVR
- 62 -
Network
Network Test
Figure 3-62
Network test interface is shown
。
Destination IP: Please input valid IPV4 address or domain name.
Test: Click it to test the connection with the destination IP address. The test results can
displayaverage delay and packet loss rate and you can also view the network status as OK , bad,
noconnection and etc
Network Sniffer backup: Please insert USB2.0 device and click the Refresh button, you can view
thedevice on the following column. You can use the dropdown list to select peripheral device.
ClickBrowse button to select the snap path. The steps here are same as preview backup operation.
You can view all connected network adapter names (including Ethernet, PPPoE, W IFI, and 3G), you canclick
the buttonon the right panel to begin Sniffer. Click the grey stop button to stop. Please note.system can not
Sniffer several network adapters at the same time.After Sniffer began, you can exit to implement
corresponding network operation such as login WEBmonitor. Please go back to Sniffer interface to clickstop
Sniffer. System can save the packet
s to thespecified path. The file is named after “Network adapter
name+time”. You can use software such asWireshark to open the packets on the PC for the professional
engineer to solve complicated problems.
Network Load
Network load is shown as in Figure 4-44. Here you can view the follow statistics of the device networkadapter.