HDCVR
- 50 -
After successful connection, you can see W IFI connection icon at the top right corner of the
previewinterface.
When the hotspot verification type is WEP, system displays as AUTO since the device can notdetect its
encryption type.
System does not support verification type WPA and WPA2. The display may become abnormal forthe
verification type and encryption type.
After device successfully connected to the W IFI, you can view the hotspot name, IP address, subnetmask,
default gateway and etc
SMTP server: Please input your email SMTP server IP here.
Port: Please input corresponding port value here.
User name: Please input the user name to login the sender email box.
Password: Please input the corresponding password here.
Sender: Please input sender email box here.
Title: Please input email subject here. System support English character and Arabic number. Max32-digit.
Receiver: Please input receiver email address here. System max supports 3 email boxes.
Systemautomatically filters same addresses if you input one receiver repeatedly.
SSL enable: System supports SSL encryption box.
Interval: The send interval ranges from 0 to 3600 seconds. 0 means there is no interval.
Health email enable: Please check the box here to enable this function. This function allows thesystem to
send out the test email to check the connection is OK or not.
Interval: Please check the above box to enable this function and then set the corresponding interval.
System can send out the email regularly as you set here. Click the Test button, you can s ee
thecorresponding dialogue box to see the email connection is OK or not.
Please note system will not send out the email immediately when the alarm occurs. When the alarm,motion
detection or the abnormity event activates the email, system sends out the em ail according to theinterval you
specified here. This function is very useful when there are too many emails activated by theabnormity events,
which may result in heavy load for the email server.
