Fujinet CVR5104HG User Manual Download

Page: 122 / 142

HDCVR

- 122 -



Brightness is 0. Please restore factory default setup.



There is no video input signal or it is too weak.



Check privacy mask setup or your screen saver.



DVR hardware malfunctions.

5. Real-time video color is distorted.

There are following possibilities:



When using BNC output, NTSC and PAL setup is not correct. The real-time video becomes



black and white.



DVR and monitor resistance is not compatible.



Video transmission is too long or degrading is too huge.



DVR color or brightness setup is not correct.

6. Can not search local records.

There are following possibilities:



HDD ribbon is damaged.



HDD is broken.



Upgraded program is not compatible.



The recorded file has been overwritten.



Record function has been disabled

7. Video is distorted when searching local records.

There are following possibilities:



Video quality setup is too low.



Program read error, bit data is too small. There is mosaic in the full screen. Please restart the



DVR to solve this problem.



HDD data ribbon error.



HDD malfunction.



DVR hardware malfunctions.

8. There is no audio when monitor.

There are following possibilities



It is not a power picker.



It is not a power acoustics.





Audio cable is damaged.



DVR hardware malfunctions.

9. There is audio when monitor but there is no audio when system playback.

There are following possibilities:

Summary of Contents for CVR5104HG















































































































































Search results

Summary of Contents for CVR5104HG

Reviews:

Related manuals for CVR5104HG

Brands by name

Popular brands

Fujinet CVR5104HG, User Manual

Search results

Summary of Contents for CVR5104HG

Reviews:

Related manuals for CVR5104HG

Brands by name

Popular brands