EN_34
H.264 DVR
5.8 Network Setup
1) IP Setup
Use Direction buttons [
1.
] to select “Network” menu. Then, press [ENTER] button to
display “Network”.
Use Down button [
2.
] to specify the detail.
Use [-, +] button to change the value.
3.
Save changes and exit the menu, press [ENTER] button.
4.
Exit the menu without making changes, press [CANCEL] button.
ITEM
ADJUSTMENT
CONFIG
STATIC IP: Edit IP address, Gateway and Netmask.
•
DHCP: Dynamic Host Configuration Protocol.
•
It is automatically set on from Local DHCP if there is Local DHCP server
(i.e. The local Router) . if the DHCP is set to ON, the IP address, Gateway
and subnet Mask will be assigned by DHCP server.(i.e.The local area
network Router)
IP Address
Enter the static IP address
Net mask
Enter the IP address of subnet mask.
Gateway
Enter the IP address for the internet gateway server.
DNS Server
Verify the name of the domain name system
PORT
Select “0000 ~ 9999”
The DVR’s connection port can be adjusted in case the default port 7000
is blocked. The DVR’s service port may be modified to allow the connec-
tion from CMS.
The static service consists of an IP address that remains constant for the duration of the contract of
the internet service, whereas the dynamic service consists of an IP address that frequently changes
every time a new connection is made through the provided modem, or recurrently in a given period
of time. Though most internet service providers offer both solutions, this manual will distinguish
the two solutions according to the commonly available service type to configure the DVR for the
networking purposes.
