EN_26
H.264 DVR
5.5 Continues Recording (Normal Recording)
The DVR comes with a certain preset settings from the factory. Therefore once the DVR is
1.
installed, immediate recording is possible after pressing the record buttons. By default, audio
alarm, motion recording are off.
Use Direction buttons [
2.
] to select “RECORD” menu. Then, press [ENTER] button to
display “RECORD”.
Use Direction buttons [
3.
] to select the Camera you wish to configure.
Use [-, +] button to change the value.
4.
ITEM
ADJUSTMENT
USE
Enable or Disable Recording on each camera.
QUALITY
Specify the record picture quality for each camera.
ULTRA > SUPER > HIGH > MIDDLE > LOW
RATE
Select recording speed for each camera.
: Recording resolutions is changed to Frame, Field and CIF mode.
<
Refer to System
>
AUDIO
Select audio recording: ON or OFF.
The audio data is always recorded in real time unlike the video data that
can be recorded in various modes including real time. There may be a
slight delay in synchronization of the audio to video
MOTION
Select Motion Recording ON or OFF. Camera does not record under nor-
mal conditions. It is discussed on Motion Recording Section.
<Note>
Press
[MENU]
button on each Item at first line to apply all setting for the rest channel.
