EN_24
H.264 DVR
5.4 Motion Recording
Use Direction buttons [
1.
] to select “MOTION” menu. Then, press [ENTER] button to
display “MOTION”.
Use Left/Right buttons [
2.
] or Number button to select the Camera you wish to configure.
Use Down [
3.
] button to move specified menu and use Left/Right buttons [ ] to select
other item.
Use [-, +] button to change the value.
4.
ITEM
ADJUSTMENT
RECORD TIME
Determines the duration of recording when motion is detected.
[10SEC ~ 300SEC]
CAMERA
SELECTION
Use Left/Right buttons [
] or Number button to select the Camera
you wish to configure.
SENSITIVITY
Level 1: Low sensitivity~ Level 20: High sensitivity.
MOTION GRID
Use this menu to setup Zones for the motion detection The screen
•
shown below will overlay the current video image.
Motion zones are set by off – it’s covered as GRAY Screen.
•
It is divided into 16 Grid and selected by Number button on IR Re-
•
mote.
•
: Select All.
•
: Cover All.
