EN_31
H.264 DVR
5.7 Schedule Recording
The schedule chart shows a graphical representation of the defined record mode: Mode1~4.
However, the schedules are only displayed if a corresponding schedule has been configured in the
schedule menu.
Use Direction buttons [
1.
] to select “Schedule” menu. Then, press [ENTER] button to
display “Schedule”.
Use Left/Right buttons [
2.
] to select on TAP menu
Use Direction buttons [
3.
] to select any Day you wish to configure.
It breaks down the days of the week in eight different categories: ALL, SUN, MON, TUE, WED,
THU, FRI and SAT. ALL is for everyday of the week. Daily schedule has priority to ALL.
Enter the beginning and end time, then select Record mode to record.
5.
BEGIN: The time of recording start.
(1.)
END: The time of recording end. The ending time must not be before the starting time or
(2.)
the same as the starting time. It must be any time over the starting time.
MODE: Up to 4 different recording modes can be pre-determined for schedule recording.
(3.)
(MODE1 ~ MODE4)
Press [Enter] button you wish to configure. The detailed menu pops up for selected Day, as
4.
shown below.
