EN_17
H.264 DVR
3) Repositioning
To reposition a camera view on screen,
3.1 Virtual Remote controller
1) press button on virtual remote controller by using mouse, then Mark will be dis-
played on screen. Move icon to the desired position by pressing directional buttons on remote
controller or virtual control pad.
2) Press a Numeric button to reposition the selected camera. Press [Enter] button to exit here
with saving changes.
3.2 Mouse
Drag the selected camera to the position you wish to reposition by using mouse.
4.3 Zooming
During live view mode or playback, it is possible to zoom into a section of the screen to get a
close-up view of the screen.
To activate the digital zoom, select the full screen display of the camera you wish to zoom.
1.
Then press the [ZOOM] button on IR Remote controller. Zoom area box pops up, as shown
2.
below.
Move the box to the desired position using Direction [
3.
] buttons.
Press [+] button to enlarge the image. Press [ - ] button to zoom out the image.
4.
Press [CANCEL] button to return normal mode.
5.
X 2
X 4
