PART Ⅱ OPERATION HOW TO REMOVE SNOW
(7)
Hold travel clutch lever slowly and set it at
"On".
(8)
Hold work clutch lever slowly and set it at
"On" to rotate auger and blower.
●
When both work clutch lever and
travel clutch lever are at "On",
though work clutch lever is
released, the lever is fixed and
does not return to "Off".
SH2-02
If travel clutch lever is set at "Off" from this point, work clutch is
interlocked and returns to "Off".
(9)
Set throttle lever at the highest position of " " and open the engine to full power.
●
If work with throttle lever at " ", full performance of the machine
cannot be demonstrated.
(10) Move slowly change lever forward and decide
on travel speed for work. When the machine
starts traveling, snow removal work starts.
●
Relations between fallen snow (quality) and
travel speed are followings. Bear reasonable
work in mind.
Much snow → Travel slowly.
Less snow → Travel a little fast.
02-8619-31
●
Pay attention to engine sound and exhaust fumes when setting travel
speed for work so that the engine is not overloaded.
If the engine is overloaded, it can also cause snow clogging.
●
The load changes according to amount, quality, and moisture of snow.
Set travel speed appropriately for the conditions.
Travel clutch lever
Work clutch lever
IMPORTANT
IMPORTANT
SUPPLEMENT
Change lever at "Low speed, forward" → Work
- 37 -
