PART Ⅱ OPERATION HOW TO OPERATE
4．HOW TO STOP MOVING
●
Do not stop the machine on slope. If stopping the machine on slope
unwillingly, be sure to put stopper blocks beside crawlers. Do not set change
lever at or through "N.Neutral". The machine may slip down.
●
Before setting travel clutch lever at "Off", be sure to set change lever at
"Neutral point" to stop traveling. Otherwise, the machine starts moving
suddenly when travel clutch lever is set at "On".
(1)
Set change lever at "Neutral point" to stop
traveling.
(2)
Take hand off travel clutch lever to set it
at "Off".
(3)
Push auger housing control lever to lower
auger housing to the ground.
(4)
Refer to "Stop the engine" (p.31) and stop
the engine.
SH2-12
●
Be sure to remove engine key from engine switch after stopping the engine.
The engine key may be lost and unexpected accident may occur.
5．HOW TO TURN
●
When turning the machine, decrease travel speed sufficiently.
●
Do not turn the machine on slope or gangplanks. The machine may turn to
unintended direction and accident such as turning over may occur.
●
When operating side clutch lever, make sure there are not people or object
in the direction the machine will turn to.
●
When turning, position of the machine changes rapidly.
Be careful not to touch handles.
●
When turning the machine while traveling for transfer, be sure to set work
clutch lever at "Off" and keep auger housing away from the ground.
●
Avoid quick turning on gravel. Otherwise, crawler catches and blows stones,
causing accident.
(1)
Pull a side clutch lever of the direction
which you want to turn the machine to. The
machine take a turn to the intended direction.
(2)
After turning, take hand off side clutch lever.
The lever returns automatically.
SH1-10
Side clutch lever
Neutral point
WARNING
WARNING
WARNING
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
Neutral
Travel
Work
Left
Right
- 33 -
