FujiFilm FinePix6900Zoom, Service Manual

Page: 32 / 143

3. Adjustment
FinePix6900ZOOM(U/E/EG) SERVICE GUIDE
32
3-5.Inspection
*: Using the PC, verify that the FinePix6900zoom is recognized as a removable disk.
*: Carry out general operation in accordance with the instructions in the user’s manual,
confirming that there are no problems.
3-4-10.End Setting
Procedure
1) When all adjustments have been made, press the [F8] key and perform End setting.
2) Follow the on-screen instructions on the PC and select the [Model ID] and [Repair Base ID].
<Fig.4-17,4-18>
Note: After end settings, the system is not in the camera jig mode.
To perform further adjustment, first enter the camera jig mode again.
<Fig.4-18> Service Center ID input screen <Fig.4-17> Model ID input screen
Fx4900z.ff
USB ID
The model is selected from an undermentioned list.
<A> FinePix4900Zoom U-model
<B> FinePix4900Zoom E-model
<C> FinePix4900Zoom EG-model
Fx4900z.ff
Please remove DC-IN Jack.
Press the [Enter] key, ALL adjustment end.