FujiFilm FinePix6900Zoom, Service Manual

Page: 31 / 143

FinePix6900ZOOM(U/E/EG) SERVICE GUIDE
3. Adjustment
31
3-4-8. Flash Adjustment
Cautions during adjustments.
1.Set the camera and gray chart. Refer to 3-2-6, Environment Settings for Flash Adjustment
2.In the flash adjustment, carry out the adjustments by making the surrounding area dark
so that there will be no influence from external light sources.
Procedure
The adjustment begins according to the instruction of the screen when setting necessary for adjusting
flash ends.<Fig.4-13, 4-14>
<Fig.4-14> Complete of Flash adjustment screen <Fig.4-13> Flash adjustment screen
Fx6900z.ff
Flash adjustment
Please set gray chart 110cm.
Press the <Enter> key when it is possible to prepare.
Fx6900z.ff
Flash adjustment
Charge - luminescence (1st time) = 2A
Charge - luminescence (2nd times) = 1E
Charge - luminescence (3rd times) = 1F
Average value(hex) = 1F
Correction value = 0
CAM adjustment end.
Press the [Enter] key, return to the menu screen.
3-4-9. Firmware version check
Note: There is no Ver-up of the firmware needing as long as there is no instruction.
Procedure
1) From the adjustment item menu, press [F7] and select Firmware version check <Fig.4-15, 4-16>.
2) When Ver-up of the firmware, press the [Y] key.
3) Ver-up of the firmware is done according to the instruction of the personal computer screen.
<Fig.4-15> Menu screen
Fx6900z.ff
Menu
[F1] Mode dial adjustment
[F2] Battery adjustment
[F3] CCD data input / OFD adjustment
[F4] CAM adjustment
[F5] AF adjustment
[F6] Flash adjustment
[F7] Firmware version check
[F8] End setting
X--> Quit
Fx6900z.ff
Firmware version chech
RISC version
Ver. 01.45
Is the version up of the firmware?
Yes ---> [Y]
No ---> [N]
<Fig.4-16> Firmware version check screen