FujiFilm FinePix6900Zoom, Service Manual

Page: 21 / 143

FinePix6900ZOOM(U/E/EG) SERVICE GUIDE
3. Adjustment
21
3-3-4.Contents of Adjustment Software
This adjustment software consists of 7 adjustment programs.
[F1] Mode dial adjustment
[F2] Battery adjustment
[F3] CCD defect data input / OFD adjustment
[F4] Camera adjustment
(Shutter,ISO sensitivity,Offset level,Aperture sensitivity,White balance, and shading adjustment)
[F5] AF adjustment
[F6] Flash adjustment
[F8] END setting
3-3-5. Starting the Adjustment Software
Procedure
1) Double click on ‘FFW.exe’. The “User Program Selection” dialog box will be displayed. <Fig.3-8>
2) Select the user program ‘Fx4900z.ff’. <Fig.3-9>
3) If the user program is selected, the “Error” dialog box is displayed, but click on “Yes.” <Fig.3-10>
4) The “FFW.exe(0)” dialog box will be displayed. <Fig.3-11>
5) Please refer to the next paragraph for customizing software for the adjustment.
<Fig.3-8>FFW.exe
<Fig.3-10> User Program Selection
<Fig.3-11> FFW.exe(0)
<Fig.3-9> Error
FinePix4900zoom
Fx4900z.ff
Fx6900z.ff
FinePix6900zoom
Fx6900z.ff
Fx4900z.ff
FinePix6900zoom Adjustment PC soft
Procedures of the camera jig mode.
1) Please set the mode dial to [SET UP] mode.
2) Please input 5V from DC-IN Jack.
3) Please connect the USB cable.
4) Please open the card cover.
Please put special firmware (SSFDC)
when you improve the version of the firmware.
5) Please holding down the [SHIFT] button,
them trun on the camera.
6) When a green lamp on the side of the mode dial lights,
please press the [Enter] key!
Yes No
Open as read-only
File name:
File of type:
Look in:
File Edit View Go Favorites Tools Help
7 object[s] selected My Computer
Open
Cancel