FujiFilm FinePix S5200, Service Manual

Page: 25 / 121

25
3. Schematics
FinePix S5200/S5600 Service Manual
Part name Block name Function
LENS CONST CCD FPC BLOCK CCD Output (IC1)
MAIN PWB ASSY CAMERA BLOCK CCD Output A/D Conversion (IC104)
MOTOR BLOCK Shutter/iris/zoom Drive (IC151)
AUDIO BLOCK Audio IN/OUT (IC281)
LCD/EVF BLOCK LCD/EVF Control (IC451), Back Light Control
PMAN BLOCK Power Control, LED Driver, Flash Charge Control (IC401)
DCDC BLOCK Power Supply Generation (IC301), Power Control
PROCESS BLOCK Image Signal Processing, USB Communications,
System Control (IC204)
KEY BLOCK Key SW, Focus, Connection with the Release SW
AF LED BLOCK AF LED Control (IC501)
FLASH PLUNGER BLOCK Plunger Drive
CN BLOCK Connection with the ST PWB
MEDIA BLOCK Connection with the xD-card
USB BLOCK Connection with the USB
ST PWB ASSY STJACK BLOCK Flash Charge
FSW PWB ASSY FSW BLOCK AF Switch SW, Flash pop up Detection
RSW PWB ASSY RSW BLOCK Release SW, Power SW
KSW PWB ASSY KSW BLOCK Key Switch
MSW PWB ASSY MSW BLOCK Mode Switch
BL FPC ASSY BL FPC BLOCK LCD Back light
CONST AF LED LED FPC BLOCK AF Assist LED
3. Schematics
3-1. Cautions
<Cautions when replacing parts>
• Do not reuse removed parts. Always use new parts.
• Note that the negative side of tantalum condensers is readily damaged by heat.
• Except for chemical condensers and tantalum condensers, voltage is not displayed on condensers with a voltage
resistance of 50V or less.
• Resistors not marked are 1/16W chip resistors.
• K
Ω
= 1000
Ω
, M
Ω
= 1000K
Ω
• B characteristics of variable resistors and semi-fixed resistors are not displayed.
3-2. Basic Block Names and Functions