FujiFilm FinePix S5200, Service Manual

Page: 101 / 121

101
5. Inspection
FinePix S5200/S5600 Service Manual
Sequemnce Item Mode Preparations for adjustment
(measurement points, subject, other)
Method of adjustment
(VRs, waveforms, required values)
Measuring
equipment and jigs
Measurement points
(VRs, positions)
5
6
7
Resolution check
Focusing check
Movie/audio
recording check
Movie/audio
playback check
Auto mode
LCD-ON
Movie
mode
LCD_ON
Playback
(1) Use a macro resolution
chart as the subject.
(2) Set the camera to Macro
mode.
Set the flash mode to
Flash OFF mode.
(3) Set the camera up so that
the chart fills the screen
from corner to corner.
(4) Press the shutter button to
take a picture.
(1) Set the Mode dial to Movie
shooting mode.
(2) Press S1 -> S2 and then
release S2 -> S1.
(3) After 5 seconds, press and
then release S1.
(1) Set the camera to
Playback mode.
(2) Press the 4-way button
(down) to play back the
movie.
(2) Press the 4-way button
(left) and check that the
Macro icon (tulip) appears
on the LCD monitor.
Press the 4-way button
(right) and check that the
Flash OFF icon appears
on the LCD monitor.
(4) Check that the indicator
lamp lights orange
(recording in progress) and
then turns off.
(1) Check that “STANDBY”
appears on the LCD
monitor.
(2) Check that movie/audio
recording begins.
Check that “REC” appears
on the LCD monitor.
(3) Check that movie/audio
recording ends and that
the data is recorded on the
card.
(2) Check that the movie is
played back on the LCD
monitor.
Check that the sound is
played back through the
speaker.