FujiFilm FinePix S5200, Service Manual

Page: 19 / 121

19
2. Disassembly
FinePix S5200/S5600 Service Manual
11
12
10
9
13
8
15
14
J702
A
C
B
(8) Unlock connector CN101 and remove the FPC.
(9) Peel off the TAPE CONDENSER.
Note that touching the main capacitor terminals will
cause an electric shock.
(10) Discharge across the main capacitor terminals.
(11) Press on the upper part of the CN701 connector
catch.
(12) Remove the connector in the direction of the arrow.
(13) Remove connector CN701 in the direction of the
arrow.
(14) Remove the 3 screws (M1.7 x 2.5).
(15) Push the ST PWB ASSY to the right to disengage it
from J702 and then pull it outwards to remove it.
[Assembly]
Re-assemble by reversing the disassembly procedure.
[Notes on assembly]
(1) ST PWB ASSY
Engage the ST PWB ASSY and the CASE F bosses in
the correct positions.
(2) MAIN PWB ASSY
A. Ensure that the wire harnesses for the SPEAKER
ASSY and MIC ASSY also run underneath the FSW
PWB.
B. Align the PLUNGER wire harness with the notch in
the PWB and then run it down and to the left.
C. Take care to ensure that the FLASH wire harness
does not protrude either left or right.