FujiFilm FINEPIX A400, Service Manual

Page: 78 / 95

78
5. Inspection
FinePix A400 Service Manual
Sequemnce Item Mode Preparations for adjustment
(measurement points, subject, other)
Method of adjustment
(VRs, waveforms, required values)
Measuring
equipment and jigs
Measurement points
(VRs, positions)
14 Shipping
inspection (1) SETUP frame No.
(2) Battery and cards not
inserted
(3) Battery cover
(4) Check that the lensretracts
and that the lensbarrier
and flash areclosed.
(5) Check that the internal
memory is formatted.
(1) New: The default SETUP
frame No. setting is
“Continuous”, but to clear
the number of frames in
the frame number memory
to zero, you should always
change the setting to
“New” before turning the
camera off.
(2) Normal
(3) Closed
*Setting and clearing date
(1) Connect the USB
cablefrom the PC to the
camera (ensure that the
PC isswitched ON).
(2) Open the card cover
andswitch power ON
(POWER_ON) while
pressing the shutter
button.
(3) Switch power OFF
(POWER_OFF).
(4) Check that the date
hasbeen cleared.