FujiFilm FINEPIX A400, Service Manual

Page: 45 / 95

45
4. Adjustments
FinePix A400 Service Manual
<Step 4>
—> The [Firmware version check] screen appears.
<Step 5>
—> The [Adjustment Items Select] screen appears.
<Note>
(1) [F1] Battery Adjustment cannot be run unless the FxA500/A400 Battery jig is used to supply power to the camera.
(2) When new MAIN PWB ASSY is replaced, MAIN PWB ASSY is automatically initialized. At that time, wait for one-two
minutes, and advance the adjustment according to the instruction of the adjustment software.
FinePix A400 Jig Mode Setup Screen
1. When adjusting the [battery voltage],
supply power (3.0+-0.1V) by using [FxA500/A400 Battery jig].
2. When executing the other adjustment,
supply power (3.0+-0.1V) by using [Power cable jig].
1) Open the Battery cover.
2) Connect the USB cable.
3) Supply 3.0V+-0.1V to the camera using the jig
as appropriate for the adjustment details.
4) Switch camera power ON while pressing the shutter button.
5) Ensure that the Led is lit.
When steps 1 to 5 are complete, press the [Enter] key on the PC.
<Fig. 4-7-3>
FirmWare = 1.58
Vendor Name =FUJIFILM
Manufacturer =FUJIFILM
ProductName =FinePix A400
Device Type
=CAMERA
SerialNo =592D3936315E06011973411300000D
Frame Work =1.00
Please download a new version if it is necessary
to download the firmware.
Advance to the adjustment item selection screen
when press the [Enter] Key of PC.
<Fig. 4-7-4>