FujiFilm FINEPIX A400, Service Manual

Page: 74 / 95

74
5. Inspection
FinePix A400 Service Manual
5-3. Inspection and Factory Settings
Sequemnce Item Mode Preparations for adjustment
(measurement points, subject, other)
Method of adjustment
(VRs, waveforms, required values)
Measuring
equipment and jigs
Measurement points
(VRs, positions)
1
2
3
4
External visual
check
Power switch
check
Zoom operation
check
Shock noise check
in Auto mode
Auto mode
LCD-ON
Auto mode
LCD-ON
(1) Observe the camera.
(1) Set the battery jig to the
camera.
(2) Insert a card and close the
card cover.
(3) Turn the camera on in
Photography mode (default
setting).
(4) If a message prompting
the user to set the date
appears, press the button
specified on the right.
(5) Check the LCD screen
display status.
(6) Check for blemishes in the
CCD live image.
(1) Zoom drive noise.
(2) Check the finder.
(3) Zoom operation (T <-> W).
(1) Apply a shock to the
camera using the shock
jig.
(1) Check for damage to the
outer casing.
(2) Check for problems with
the clicking or sliding
movement of switches.
(3) Check for dust or fogging
in the finder.
(4) Check for dust or fogging
in the LCD.
(2) Card for recording
checking.
(3) Check that the camera
beeps.
(4) < BACK>
(5) Check that the live image
and text is displayed.
(6) Monitor a very bright
subject and check that the
live image does not dim or
darken.
(1) Check that there is no
abnormal noise.
(2) Check that there is no
edge blurringCheck that
the screen display
accurately tracks zooming.
(3) Check that the zoom
moves smoothly.
(1) Check for problems on the
LCD monitor.
(2) Check that the camera
recovers from
synchronicity disruption.
(Note) Do not apply shocks
directly to the lens or card
cover.