FujiFilm DR-ID 670, Operation Manual

Page: 25 / 62

2-1
System Configuration (Product Overview)
2
DR-ID 670 Operation Manual 897N102735
Chapter 2
System Configuration
(Product Overview)
2.1 DR-ID 670
2.1.1 System Confi guration
Flat panel sensor Flat panel sensor Flat panel sensor
Battery charger Access point
Power supply unit
DR-ID 600MP
DR-ID 670MC (Software)
Interface library Control software
DR-ID 670
• The products in can be installed in patient environment.
• DR-ID 670 consists of DR-ID 600MP, DR-ID 670MC and DR-ID 601SE/DR-ID 602SE/DR-ID
611SE/DR-ID 612SE/DR-ID 613SE.
• An access point is used only in wireless communication mode.
* The confi guration of the system varies depending on the country.
• One to three fl at panel sensors can be connected to one power supply unit. If you connect all three
fl at panel sensors in wired communication mode or use them with three different techniques, two
power supply units are required.