FujiFilm DR-ID 670, Operation Manual, Page: 9 / 62

1-3
For Safe Operation
1
DR-ID 670 Operation Manual 897N102735
WARNING
Flammable gasses may stay in the room after disinfection. Ventilate the room well before
powering on the equipment following disinfection.
Warnings for Abnormalities
WARNING
If any of the following occurs, immediately turn off the power of each unit, unplug the power
cable from the outlet, and then contact a FUJIFILM dealer.
● When smoke, strange odor, or abnormal sound is present.
● When a foreign object (such as a metal object) or liquid enters the product.
● When the equipment is dropped or hit and is damaged.
Installation Precautions
CAUTIONS
Do not install the equipment in a location with the following conditions.
● Where the temperature changes sharply.
● Close to heat sources such as a heater.
● Where the equipment may be exposed to water due to water leakage or ingress.
● Where corrosive gas may be generated.
● Where there is excessive dust.
● Where the equipment is subject to frequent or excessive vibration/shock.
● Where the equipment is exposed to direct sunlight.
● Where there is no ventilator.
CAUTIONS
For veterinary or mobile applications, contact a FUJIFILM dealer.
CAUTIONS
Use the system indoor in wireless communication mode. For details, contact a FUJIFILM dealer.
CAUTIONS
Do not place any object in a place where removal of the power cable is prevented.
Connection Instructions
WARNING
Make sure that the devices to be connected to the equipment are authorized for connection.
WARNING
When the DR-ID 670 is connected to X-ray equipment, make sure that the equipment complies
with IEC 60601-1.