FujiFilm DR-ID 670, Operation Manual

Page: 26 / 62

2-2
System Configuration (Product Overview)
2
DR-ID 670 Operation Manual 897N102735
2.2 Unit Names and the Functions
Unit names and the functions of the DR-ID 670 are described below.
Status lamp
Connector
Applied part
Flat panel sensor
(DR-ID 601SE, DR-ID 602SE, DR-ID 611SE and DR-ID 612SE)
* Exposure plane is shown in this figure.
Main switch
Power
status LED
Power supply unit (DR-ID 600MP)
Status lamp
Applied part
Connector
Flat panel sensor (DR-ID 613SE)
* Exposure plane is shown in this figure.
Name Description
Flat panel sensor DR-ID 601SE and DR-ID 602SE incorporate a GOS indirect panel. The DR-ID 611SE,
DR-ID 612SE and DR-ID 613SE incorporate a CsI indirect panel.
There are five types of flat panel sensors: DR-ID 601SE, DR-ID 602SE, DR-ID 611SE,
DR-ID 612SE and DR-ID 613SE (wireless/wired communication mode).
Status lamp
ERROR
POWER
READY
Indicates the equipment status by LEDs.
READY (Green)
On Exposure possible
Blinks for 1.0
second.
During exposure sequence
Off Ready
POWER (Green)
(In wireless communication
mode, the status of the battery
pack is indicated. In wired
communication mode, the
power status is indicated.).
Wireless Wired
On OK (Power ON) Power ON
Blinks for 1.0
second.
Less than 10 min.
-
Off Empty (Power OFF) Power OFF
ERROR (Orange)
On Communication not possible.
Blinks for 1.0
second.
Error occurred
Off Normal
* All LEDs are off when the equipment is off.
Power supply unit
(DR-ID 600MP)
Supplies the power to the flat panel sensor and connects the flat panel sensor and the
control cabinet.
Main switch Supplies the power to the flat panel sensor and the inside of the power supply unit.
Power status LED Displays ON/OFF of the power supply unit.
Control software I/F library
(DR-ID 670MC)
Controls the flat panel sensor.