Fuji Xerox ApeosPort-VII C5588, Quick Reference

Page: 50 / 247

2 Product Overview
50
Reference
z
For more information, refer to "System Settings Procedure" (P.120).
2
Select [System Settings] > [Common Service Settings] > [Power Saver Settings].
3
Select [Power Saver Timers], and then select [Change Settings].
4
Set the time to elapse until entering the Power Saver mode, in 1 minute increments.
„
From Last Operation to Low Power Mode
Set the time to elapse from the last operation until the device enters the Low Power mode.
Note
z
The default value for [From Last Operation to Low Power Mode] is [1] minute. You cannot disable the Low
Power mode.
„
From Last Operation to Sleep Mode
Set the time to elapse from the last operation until the device enters the Sleep mode.
Note
z
The default value for [From Last Operation to Sleep Mode] is [40] minute. To make the device enter the Low
Power mode, set a longer period of time for [From Last Operation to Sleep Mode] than for [From Last
Operation to Low Power Mode].
5
Select [Save].
6
Select [Close] repeatedly until the [Tools] screen is displayed.
7
Select [X].