manualshive.com logo in svg

Fuji Xerox ApeosPort-VII C5588, Quick Reference

Share
Download
Fuji Xerox ApeosPort-VII C5588 Quick Reference Download Page 158

7  Problem Solving

158

3

Return the handle [1a] to the original position.

4

Close the front door of the High Capacity Feeder.

5

If the paper cannot be removed in step 2, open the top cover of Tray 5 (Bypass) and 
remove the jammed paper and any paper loaded.

6

Close the top cover of Tray 5 (Bypass).

7

When two or more sheets of paper were loaded, jog the paper you removed making sure 
that all four corners are neatly aligned.

8

Insert the paper into the tray with the printing side facing up until its leading edge lightly 
comes up against the paper feed entrance.

Note

z

Do not load paper exceeding the maximum fill line. It might cause paper jams or device malfunctions.

Summary of Contents for ApeosPort-VII C5588
























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands