44
INZ-TN2ZRE-E
6.5.2.2 Forced stop of auto zero calibration
This mode is used to cancel the auto zero calibration forcedly.
(1) In the “Setting of Auto Zero Calibration”
screen that appears, point the cursor to
“Stop” by pressing the or the key.
Press the
ENT
key.
(“Auto Zero Calibration Stop” appears
when the screen is selected while auto
zero calibration is performed.)
(2) “Stop” is highlighted, displaying a mes-
sage to confirm the stop of auto zero
calibration. Press the
ENT
key to stop the
auto zero calibration and the
ESC
key to
cancel (not stopped).
6.5.2 Forced run/stop of auto zero calibration
Auto zero calibration can be performed just once, or auto zero calibration can be forcibly stopped
during calibration.
6.5.2.1 Execution of auto zero calibration (only once)
(1) In the “Setting of Auto Zero Calibration”
screen that appears, point the cursor to
“Run” by pressing the or the key.
Press the
ENT
key.
(2) “Run” is highlighted, displaying a mes-
sage to confirm execution of auto zero
calibration. Press the
ENT
key to execute
the calibration, and press the
ESC
key to
cancel.