12
1.3 LED
Indicators
1.3.1 Network
Status
LED
•
Conforms to the prescribed “network status LED” behavior as dictated in the EtherNet/IP
specification, Volume 2, Chapter 9.
1.3.2 Module Status LED
•
Conforms to the prescribed “module status LED” behavior as dictated in the EtherNet/IP
specification, Volume 2, Chapter 9.
•
Contact technical support if a blinking red error code is observed.
1.3.3 Ethernet Link/Activity LEDs
•
The green “LNK/ACT” LEDs (one for each Ethernet port) are lit whenever a viable Ethernet network
is connected, and blink when network packets are sent or received on the associated port.
1.3.4 Ethernet
Speed
LEDs
•
The amber “SPEED” LEDs (one for each Ethernet port) are lit if the link speed is 100 Mbps, and are
off if the link speed is 10 Mbps.
1.4 Environmental
Specifications
The interface’s environmental specifications are detailed in Table 1.
Table 1: Environmental Specifications
Item
Specification
Operating Environment
Indoors, less than 1000m above sea level, do not expose to direct
sunlight or corrosive / explosive gasses
Operating Temperature
-10
∼
+50
°
C (+14
∼
+122
°
F)
Storage Temperature
-40
∼
+85
°
C (-40
∼
+185
°
F)
Relative Humidity
20%
∼
90% (without condensation)
Vibration
5.9m/s
2
(0.6G) or less (10
∼
55Hz)
Cooling Method
Self-cooled
Communication Speed
10/100BaseT auto sensing
This device is lead-free / RoHS-compliant.
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: [email protected]
