WWW.FUHR.DE
7
834
autotronic
881
multitronic
68
min. 21.5
78
27
max. R6
max. R6
17
ø 2.6 - 2.7
85
36.4
42 mm deep
(aluminium)
3.3 Routing dimensions/drilling jig
3.4 Mounting the cover
Important – read the following before fi tting the
cover:
The radio fi ngerprint scanner must be supplied to the
customer in pairing mode = red and green LED‘s are lit.
If necessary, reset the radio fi ngerprint scanner – refer
to pages 13/14, chapter 7.
Do not affi x the cover until all other installation steps
are complete and the fi ngerprint scanner has been
successfully paired with the radio receiver. Once the
cover is in place, it may not be possible to remove
without damaging it.
Replacement cover: Article No. NB28052N
Fit the cover with the
recess pointing down-
wards. Before fi tting,
remove the protective
fi lm from the adhesive
surfaces. Press the cover
fi rmly in place.
Use the cleaning cloth provided
to clean the areas to which the
adhesive will be applied
3x20 for
timber/PVC
profi les
M3x8 for
aluminium/steel profi les