700 – Axiom - H1 Overview– Rev 7 - 03 Aug 2017
12/37
iii.
Continue adding to the list until all the variables you want logged appear on the
right-hand side.
iv.
Choose a logging interval time
v.
Press
OK
to save.
d.
Return to the
Home
screen when you are finished.
Display or Configure Telemetry port settings
2.1.5
1.
To display or configure the current telemetry port settings:
a.
On the
Home
screen, press
Telemetry
.
b.
Setup is required only for G6 transmitter. If the Datalogger is connected to a G6
transmitter (internally or externally):
i.
Press the port’s
Status
button to display a summary status screen for the G6
transmitter.
ii.
Press the
Setup Cog
and then
Edit
to configure your station’s NESID and relevant
transmit parameters.
iii.
Navigate to the Self-Timed Tab to set the desired message format.
iv.
Press
OK
after you are done to return to the setup screen.
v.
Next, select the desired message format and then press
Set Message
to configure
the data transmitted on each G6 transmission.
vi.
Return to the
Home
screen when you are finished.
Confirm Station Operation
2.1.6
1.
Confirm proper station operation:
a.
On the
Home
screen, press
Current Conditions
b.
Press the
Setup Cog
and choose which Datalogger parameters to monitor. Press
OK
when
finished.
c.
Press
Refresh
on the
Current Conditions
screen to update the display with the latest sensor
readings.
d.
Return to the
Home
screen when you are finished.
Save Configuration to USB
2.1.7
1.
For your records, save the Datalogger’s configuration to your USB memory stick:
a.
Plug your memory stick into one of the Datalogger’s
USB HOST
ports.
b.
On the
Home
screen, press
Station
and then select the
Set-up
tab.
c.
Press
Save Configuration
and then press
OK
to save the Datalogger’s configuration to the
USB memory stick.