manualshive.com logo in svg

FSI AM250, User Manual

Share
Download
FSI AM250 User Manual Download Page 5

© 2015 Flanders Scientific, Inc.

5

Return to Table of Contents

Parts & Their Functions

•  SDI 1:

 Used to select SDI Input 1 as the active Input.

•  SDI 2:

 Used to select SDI Input 2 as the active Input.

•  YPbPr:

 Used to select the Component Analog Input as the active Input.

•  VIDEO:

 Used to select the Composite Analog Input as the active Input.

•  DVI:

 Used to select the DVI-I Input as the active Input.  DVI-Digital / DVI-Analog toggle is available in the System Menu 

(Menu/System/DVI Selection).

•  F1:

 Assignable function key.  This key’s function is selectable from the Function Menu.

•  F2:

 Assignable function key.  This key’s function is selectable from the Function Menu.

•  F3:

 Assignable function key.  This key’s function is selectable from the Function Menu.

•  F4:

 Assignable function key.  This key’s function is selectable from the Function Menu.

•  F5:

 Assignable function key.  This key’s function is selectable from the Function Menu.

•  MENU:

 Used to toggle On Screen Menu.

•  LEFT: 

Used to navigate On Screen Menu.

•  UP:

 Used to navigate On Screen Menu.

•  DOWN:

 Used to navigate On Screen Menu.

•  RIGHT / ENTER:

 Used to navigate On Screen Menu and to confirm selections within the On Screen Menu.

•  PHASE (A1):

 Used to adjust phase. Press the Phase key and use the Up and Down arrows to adjust. Hue is locked by 

default on SDI, but can be unlocked by the SDI Hue Adjustment option on the System Menu.

•  BRIGHT (A2):

 Used to adjust brightness higher or lower. Press the Bright key and use the Up and Down arrows to 

adjust. 

Note:

 Brightness adjustments should NOT be used increase the overall peak white luminance of the unit, use 

the Luminance setting on the System Menu to adjust overall luminance.

•  CHROMA (A3):

 Used to adjust chroma higher or lower. Press the Chroma key and use the Up and Down arrows to 

adjust.

•  CONTRAST (A4):

 Used to adjust contrast higher or lower. Press the Contrast key and use the Up and Down arrows to 

adjust.

•  APERTURE (A5): 

Used to adjust and reset settings on several features.

•  MUTE: 

Used to mute the sound.

•  VOL + / VOL -: 

Used to adjust the volume.

•  POWER:

 Used to turn power on/off.

Keyboard

Summary of Contents for AM250




































Reviews:

No comments

Brands by name

Popular brands

Load more brands