FSCurtis ICommand-Touch
V1.15
01.08.2016
19
If the run-in phase is interrupted, the appropriate cancel code must be entered. See also
Table 1.
During the run-in phase, the converter is run in at gradually increasing speed; 20s is spent
in each step with a pause of two minutes between each step.
The run-in routine is also activated if the converter setting is changed from "no" to "yes" in
the menu.
3.3.4
Reset functions
As well as the classic default setting, which resets the settings to their respective default
values, there are other ways of resetting operating hours counters, error memories,
graphics and switching cycles.
3.3.5
OEM functions
These codes enable the branding to be changed from FSCurtis (standard) to Dalva,
FSCurtis or Kraftmann. The control system's functionality remains exactly the same.
However, the welcome screen and screen saver are displayed with the relevant logos and
the choice of system types is adapted accordingly.
3.4
Inputting parameters
All the parameters that can be changed appear with a button in the menus (see
Illustration 8). If a value is display-only (cannot be changed), a field with a light blue
background appears instead of the button.
Figure 8: Example of a menu. All the parameters displayed here can also be changed.
Summary of Contents for Nx Series
Page 2: ......