Frymaster FilterQuick Series, Technical Reference Manual

Page: 133 / 170

5-30
Touchscreen-Equipped Fryers
)4B7*DV
VIB (Valve Interface Board) Actuator Board Pin Positions and Harnesses
NOTE: DO NOT CHECK WITH HARNESSES UNPLUGGED AS SHORTING THE PINS MAY OCCUR WHICH WILL DAMAGE THE BOARD.
Connector From/To Harness PN Pin # Function Voltage Wire Color
J1
VIB (AIF) Probes, OIB
Probes
1086013 Full VIB
1086014 Split VIB
8263287 VIB (AIF) Probe
Only
1 Right VIB Probe Ground
Ohm
Yellow
2 Right VIB Probe Red
3 Left VIB Probe Ground Yellow
4 Left VIB Probe Red
5 Right OIB Ground Green
6 Right OIB Probe White
7 Left OIB Ground Green
8 Left OIB Probe White
9 Right OIB Relay +
24VDC
Red
10 Right OIB Relay - Black
11 Left OIB Relay +
24VDC
Red
12 Left OIB Relay - Black
13 Ground
14 24VDC + 24VDC
J2
P-Bus Power
Communication from
SIB
(RJ11)
8075555
1 Ground
2 P-BUS power +5VDC
3 Modbus RS485 B
4 Modbus RS485 A
5 Signal ground
6 P-BUS power +12VDC
J3
24VDC Power Input
between VIB Boards
(RJ45)
8075810
1 Ground
2 Ground
3 Ground
4 Ground
5 Power +24VDC
6 Power +24VDC
7 Power +24VDC
8 Power +24VDC
J4
24VDC Power Output
between VIB Boards
(RJ45)
8075810
1 Ground
2 Ground
3 Ground
4 Ground
5 Power +24VDC
6 Power +24VDC
7 Power +24VDC
8 Power +24VDC
J5 FV (Right) Drain
1 Drain + (Open) +24VDC Black
2 Drain – (Closed) -24VDC Red
3 Drain Position Blue
4 Ground White
J6 DV (Left) Drain
1 Drain + (Open) +24VDC Black
2 Drain – (Closed) -24VDC Red
3 Drain Position Blue
4 Ground White
J7 FV (Right) Return
1 Ret + (Open) +24VDC Black
2 Ret – (Closed) -24VDC Red
3 Ret Position Blue
4 Ground White
J8 DV (Left) Return
1 Ret + (Open) +24VDC Black
2 Ret – (Closed) -24VDC Red
3 Ret Position Blue
4 Ground White