Frymaster FilterQuick Series, Technical Reference Manual

Page: 131 / 170

5-28
Touchscreen-Equipped Fryers
)4B7*DV
SIB (Smart Interface Board) Pin Positions and Harnesses
NOTE: DO NOT CHECK WITH HARNESSES UNPLUGGED (except ATO and Temp Probes) AS SHORTING THE PINS MAY OCCUR WHICH WILL DAMAGE THE
BOARD.
Connector From/To Harness #
Pin
# Function Voltage Wire Color
J1
From Transformer
8076243 Full
without OIB
8196364 Full
with OIB
8076244 Split
without OIB
8076365 Split
with OIB
1 24VAC Input 24VAC Orange
2 Ground - Blue
To High Limit 3 24VAC Out 24VAC Orange
From High Limit 4 24VAC Input 24VAC Blue
From Basket Lift V-Relay 10 12VDC Input 12VDC Yellow
To Right Basket Lift 11 12VDC Out 12VDC Brown
To Left Basket Lift 12 12VDC Out 12VDC Brown
Left SIB Jumper 17 Ground - Gray
Left SIB Jumper 18 5VDC Out 5VDC Gray
J2
To 24VAC Right Ignition Module 1 24VAC Out 24VAC Orange
From 24VAC Right Ignition Module 2 Ground Green
From Right Ignition Module 3 Alarm In 24VAC Yellow
From Right Module Gas Valve 4 24VAC Input 24VAC Orange
To Air Switch 5 24VAC Out 24VAC Orange
From Air Switch 6 2VAC Input 24VAC Blue
To 24VAC Left Ignition Module 12 24VAC Out 24VAC Red
From 24VAC Left Ignition Module 13 Ground Green
From Left Module Gas Valve 14 24VAC Input 24VAC Orange
To AC Blower Relay 21 AC Blower Relay -12VDC Brown
To AC Blower Relay 22 AC Blower Relay +12VDC Yellow
J3 ATO Probe 8263286
1 Ground Yellow
2 RTD Red
3
J6 From Controller
1 C-BUS + 5VDC
2 C-BUS - 5VDC
3 5VDC 5VDC
4 RS485 - 5VDC
5 RS485 + 5VDC
6 Signal Ground
7 12VDC 12VDC
8 Signal Ground
J7
C-Bus Harness 8075549 or
8075551
1 5VDC+ +5VDC
2 CAN High
3 CAN Low
4 Ground
J8
C-Bus Harness or
Network Resistor
(pins 2 & 3)
8075549 or
8075551 or
(8075632 Resistor)
1 5VDC+ +5VDC
2 CAN High
3 CAN Low
4 Ground
J9
P-Bus Power Communication from
SIB to VIB or between SIB’s
RJ11
8075555 or
8075553
1 Ground
2 P-BUS
power +5VDC
3 Modbus RS485 B
4 Modbus RS485 A
5 Signal ground
6 P-BUS power +12VDC
J10
P-Bus Power Communication from
SIB to VIB or between SIB’s
RJ11
8075555 or
8075553
1 Ground
2 P-BUS
power +5VDC
3 Modbus RS485 B
4 Modbus RS485 A
5 Signal ground
6 P-BUS power +12VDC
J11 Cooking Probe 8263285
1 Ground Yellow
2 Probe Red