Frymaster FilterQuick Series Technical Reference Manual Download Page 119

Page: 119 / 170

5-16

Touchscreen-Equipped Fryers

Parts Accessible Behind Removable Panels

The sides of the fryer are removable. Screws

t into slots on the side panels and bottom (left

and above). Loosening them allows the side
to be removed to access the gas valve, top off
pump.

Spark modules on gas units are suspend-
ed under the control box. Two screws
hold the cover. Two bolts attach the mod-
ule’s box to the bezel above.

In most instances, the USB port for soft-
ware updates and the rocker switch for
platform resets are in the left column of
the left door.

The controller is constrained by a lanyard (ar-
row) when removed from the bezel. The locator
is visible in the front.

←

Summary of Contents for FilterQuick Series











































































































































































Search results

Summary of Contents for FilterQuick Series

Reviews:

Brands by name

Popular brands

Frymaster FilterQuick Series, Technical Reference Manual

Search results

Summary of Contents for FilterQuick Series

Reviews:

Brands by name

Popular brands