Frymaster FilterQuick Series, Technical Reference Manual

Page: 118 / 170

5-15
Touchscreen-Equipped Fryers
Successful communica-
tion from the fryer can be
determined at the Software
Version screen on the
controller, where the signal
strength and the IP address
can be seen.
Data
fl
ow from the
SUI to the store’s
wireless to a cloud
server and then on
to an analytic com-
puter display.
End Ͳ of Ͳ Line
Resister
OQS
End Ͳ of Ͳ Line
Resister
C Ͳ Bus
C
Ͳ
Bus
P
Ͳ
Bus
P
Ͳ
Bus
C Ͳ Bus
UI
In
te
rf
ace
UI
In
te
rf
ace
24VDC
Probes
Probes
Probes
SIB1
Th e FQ4000 Controller Introduces Fryer Connectivity
Data on the fryer’s use is collected on the circuit
boards, consolidated by the Smart Interface Board and
passed over the bus to the SUI board, located in the
Filter Interface Board box.
Th e data is then transfered, via the store’s wireless
router or a cellular router, to an internet-based dash-
board hosted on a server. Store management can mon-
itor oil usage, how frequently the staff responds to fi lter
requests, cook cycles and store-level fryer management.
Successful communication from the fryer can be
determined from the Soft ware Version screen of the
controller, where signal strength and the IP address can
be seen (see below).
An antenna on the
exterior of the FIB
is the connection to
the store’s wireless.
Caps on either side of
the antenna provide
access to LAN and
USB ports.
NOTE : The end-of-line re-
sister is a component of the
SUI in fryers with wireless
communication.