- 8 -
CAUTIONS
GB
Follow the cautions below when using these cutlery polishers:
TAKE INTO ACCOUNT THE WORK ENVIRONMENT
•
Place the dryer on a firm, level surface.
•
Do not install the dryer in a humid or dusty location.
•
The machine is not worthy working in the bleakness, nor operating without
ilumination.
•
Do not expose the dryer to the rain.
•
Do not use the dryer near liquids or inflammable gases.
•
Maintain the order in your working zone; this will avoid possible accidents.
•
Pay attention when working with the machine and work with common sense.
DON’T SUBMERGE OR DEW THE MACHINE WITH WATER.
DON’T INTRODUCE ANIMALS INSIDE OF THE MACHINE.
SWITCH THE MACHINE OFF AFTER FINISHING THE WORK.
STOP 15 MINUTES EVERY 4 CONTINUOS HOURS OF WORKING.
MAINTAIN THE CHILDREN AT DISTANCE
. The machine should be manipulated by
qualified and properly formed staff. The machine can be managed by adults. Don’t allow
the children to use or play with it. Have special caution when the machine is working.
NEVER BRING THE HANDS THE NEAR OR MANIPULATE THE GERMICIDAL LAMP AND
THE HOT AIR TURBINE AREAS WHEN THE DRYER IS WORKING.
PROTECT YOUSELF AGAINST ELECTRICAL SHOCKS
. Avoid the contact of the machine
with electric conduction materials.The machine should always have an isolation
protection when being in contact with other materials.
THE REGULATION, CONSERVATION, REPAIR AND CLEANNING OPERATIONS OF THE
MACHINE ARE CARRIED OUT WITH THE MACHINE STOPPED AND DISCONNECTED
FROM THE NET.
If you haven’t been using the machine and before proceeding to the
maintenance or the substitution of a piece disconnect it from the net.
CONNECTION CABLE FOR EXTERNAL
. Only use marked confirmed and meetly jumper
leads.
THE REPAIRS WILL ONLY BE CARRIED OUT BY AN SPECIALIST.
This electric machine
has been manufactured executing the rules that official organisms demand. The repairs
can only be carried out by an specialist; otherwise accidents can happen.
CONTROL IF YOUR MACHINE HAS ANY DETERIORATION.
•
All the components should complete CE requirements and approvals to guarantee
the perfect working of the machine.
•
Any deteriorated piece, switch or feeding cable will be changed or repaired by a
post-sale service workshop, or by qualified staff to avoid any danger.
USE ONLY THE ACCESSORIES AND THE ADAPTIVE UNITS MENTIONED IN THE
BRIEFINGS, OR ANY THAT HAVE BEEN RECOMMENDED BY THE MANUFACTURER OF
