- 4 -
2.- OPERATION
Once the sawdust filling operation has been carried out, the machine is ready.
- Make sure that master switch is in the OFF position. Connect the plug to the electrical
net (FIG .4)
- Make sure that the superior cover is closed.
-Push the switch On. The machine will begin to work immediately.
- The cutlery should always be damp before introducing it into the machine. It´s
completely ineffective with dry cutlery. (FIG.5)
-
Cutlery can be introduced immediately after finishing the laundry in the dishwasher;
the cutlery must get wet with cold water if some time has passed after its exit.
- Introduce the cutlery through the upper opening ( groups of twelve pieces for SH-7000
and five pieces for SH-3000 ).A small interval should be left between a bundle and
another to avoid any type of block. ( FIG.6)
- After beginning to feed the it will carry out automatically the drying and poslishing
process. Once finished the process the cutlery will begin to leave for the outlet and be
ready to be used. ( FIG.7).
OBSERVATION:
If the machine has been working for a long time, four hours more or less, and you
observe that the sawdust has a high degree of humidity, you will have to leave the
machine working without cutlery for half and hour to eliminate the excess of humidity.
