- 7 -
Adjustments to be carried out for the vibratory movement of the machine:
•
Twice a year adjust the screws which hold the hot air turbine and the
germicidal lamp. You could see them just elevating the cover.
•
Twice a year loose and retire the stainless steel front cover that is subject in
each lateral by three screws. Adjust not only the four screws from the wharves
but also the screws of the vibrant motor.
•
Follow the manufacturer indications about the granulate change. Remember
that if the machine works with very used sawdust it won´t carry out its work
appropriately.
