29
The receiver will not "wake up" from standby mode
• The receiver will power-up automatically when:
• Volume level on auxilary audio device is set too low. Make sure microphone is on and working correctly,
and the receiver is receiving the signal. The receiver keeps going into standby mode when playing
auxiliary audio - Volume level on auxiliary audio device is set too low.
Adapto LED keeps flashing on and off
• This is normal. The light will turn on when the Adapto platform is processing the speech signal. There is nothing
you need to do.
High or low pitched whine or hum coming through speakers
• There may be a ground loop with the system. Install a ground loop isolator.
• There may be "noisy" electrical wiring. Install an AC line filter.
Sensor lights are blinking
• This is normal. When the 940R is in standby mode the sensor LED's will blink every two seconds.
