Fronius Robacta Reamer Braze+, Operating Instructions Manual

Page: 3 / 68

Table of contents
Safety Instructions 5
Explanation of Safety Instructions 5
General 5
Intended Use 6
Environmental Conditions 6
Obligations of the Operating Company 6
Obligations of Personnel 6
Particular Hazard Areas 6
Personal Protection and Protection of Others 7
EMC Device Classifications 7
EMC Measures 7
EMF measures 8
Safety Measures at the Setup Location and during Transport 8
Safety Measures in Normal Operation 9
Maintenance and repair 9
Safety Inspection 9
Disposal 9
Safety Symbols 10
Copyright 10
General 11
Warning notices affixed to the device 13
Warning Notices on the Cleaning Device 13
Transport 15
Transport equipment 15
Transport Instructions on the packaging 15
Information about Unpacking the Device 15
Scope of Supply 17
Scope of Supply 17
Available Options 17
Operating controls, connections and mechanical components 19
Safety 21
Safety 21
Operating controls, connections and mechanical components 22
Operating Controls, Connections, and Mechanical Components 22
Harting Han6P (X1) Connecting Plug Configuration for the Robot Control 23
General 23
Harting Han6P (X1) Connecting Plug Configuration 23
Installation and Startup 25
Safety 27
Safety 27
Before installation 28
Intended Use 28
Operating personnel, maintenance personnel 28
Setup regulations 28
Specifications for the Compressed Air Supply 28
Measures to ensure safe operation of the device when operating personnel are untrained 29
Permitted Cable Length 29
Screwing the Cleaning Device to the Solid Surface 30
Screwing the Cleaning Device to the Solid Surface 30
Setting up the Compressed Air Supply 31
Setting up the cleaning device compressed air supply, compressed air relief valve function 31
Cleaning the Cleaning Head 32
Installing the Cleaning Head 32
Defining the Welding Torch Cleaning Position 34
Welding Torch Cleaning Position 34
3
EN-US