Safety
Safety
Please follow the safety rules below during all the tasks described in the "Installation and
Commissioning" chapter.
WARNING!
Incorrect operation and incorrectly performed work can cause serious injury and
damage to property.
All work listed in these operating instructions may only be performed by trained specialist
personnel. All functions described in these operating instructions may only be used by
trained specialist personnel. All work and functions specified must only be performed and
used once the following documents have been read and understood in full:
▶
these Operating Instructions
▶
all Operating Instructions for system components, especially the safety rules
WARNING!
Machines that start automatically can cause serious injury and damage.
In addition to these operating instructions, the safety regulations of the robot manufac-
turer and welding system manufacturer must be followed. For your personal safety, make
sure that all protective measures have been taken in the robot's operating area and
remain in effect while you are in this area.
WARNING!
If the cleaning device is being supplied with voltage and/or compressed air, the
following could cause serious injury:
▶
the rotating cleaning head
▶
the cleaning head that moves up and down
▶
flying debris (chips, etc.)
If work is required on the cleaning device while the cleaning device is being supplied with
voltage and/or compressed air:
▶
ensure that no body parts (especially fingers, hands and hair) and objects and items
of clothing get caught in the cleaning head
▶
wear hearing protection
▶
wear protective goggles with side protection
27
EN-US
Summary of Contents for Robacta Reamer Braze+
