Fronius Robacta Reamer Braze+, Operating Instructions Manual

Page: 34 / 68

Defining the Welding Torch Cleaning Position
Welding Torch
Cleaning Position Adjust the welding torch cleaning position as shown below.
1
1
Set the “Calibrate cleaning head” input sig-
nal for one second
-
– this will move the cleaning head to
the correct starting position
2
3
Deactivate the “Calibrate cleaning head” input signal
4 5
6
NOTE!
Before the set-up process, place the
Teach-gauge on the cleaning head, and
ensure that the cleaning device has
been set up to be straight from a hori-
zontal and vertical perspective.
If this is not the case, correct the assembly
position.
34