Fronius Robacta Reamer Braze+, Operating Instructions Manual

Page: 31 / 68

Setting up the Compressed Air Supply
Setting up the
cleaning device
compressed air
supply, com-
pressed air relief
valve function Set up the compressed air supply:
1
Disconnect the compressed air supply to the cleaning device and ensure that this
compressed air supply remains disconnected while the tasks described below are
being carried out on the device
2
Screw the supplied compressed air relief valve on to the compressed air connection
on the cleaning device
3
Connect the compressed air supply to the compressed air relief valve
NOTE!
You can interrupt and restore the compressed air supply to the cleaning device by
moving the compressed air relief valve back and forth.
The illustration to the left shows the com-
pressed air relief valve closed = com-
pressed air supply to the device interrup-
ted
The illustration to the left shows the com-
pressed air relief valve open = device is
being supplied with compressed air
31
EN-US