III
EN
Operation or storage of the device outside the stipulated environmental
conditions will be deemed to be not in accordance with the intended purpo-
se. The manufacturer shall not be liable for any damage resulting from such
improper use.
For exact information on permitted environmental conditions, please refer to
the „Technical data“ chapter.
The ambient air must be clean and free from
-
potential sources of ignition
-
smoke
-
open flames and fire
-
flammable materials
-
petrol and other combustible liquids or vapours
-
dust
-
acids
-
corrosive gases or substances
Height above sea level: up to 2000 m (6500 ft)
Environmental
conditions
Safe use
The operating instructions are primarily aimed at system integrators who
use the energy cells as components in a larger system. The contents are
therefore intended for qualified personnel. An electric shock can be fatal. Do
not perform any actions other than those described in the documentation.
All cables and leads must be complete, undamaged, insulated and adequa-
tely dimensioned. Loose connections, scorched, damaged or inadequately
dimensioned cables and leads must be immediately repaired by authorised
personnel.
Leaks in the hydrogen supply can lead to fire or explosions. The hydrogen
supply must be set up according to the relevant standards and connection
plan in the „Commissioning“ chapter. Maintenance and repair work on the
hydrogen supply must be carried out according to the relevant standards
and national regulations. The technical data shown on the rating plate
applies.
Maintenance and repair work on the device may only be carried out by
manufacturer-authorised personnel.
It is impossible to guarantee that bought-in parts are designed and manuf-
actured to suit their application, or that they satisfy safety requirements. Use
only original replacement parts (also applies to standard parts).
Do not carry out any modifications, alterations, etc. without the
manufacturer’s consent.
Components that are not in perfect condition must be replaced immediately.
