27
EN
WARNING!
Incorrect operation may result in serious injury or damage. Do
not use the functions described here until you have thoroughly read and
understood the following documents:
-
these operating Instructions
-
all the operating instructions for the system components, especially the
safety rules
NOTE!
Danger of damage to the device. The permitted ambient temperature
range is +3 °C to +40 °C (37.4 °F to 104 °F).
1. Turn the keylock switch to the - I - position
„FRONIUS Energy Cell“ appears on the display
The energy cell runs a safety test and the display reads „Standby“.
The system display then appears.
IMPORTANT!
The overview can be customised using a number of measured values
that can be selected for and arranged in the overview as required. For more de-
tailed information, see the „Set-up menu“ section.
This device is designed to be used in a frost-free environment within a temperature
range of + 3 °C to + 40 °C (37.4 °F bis 104 °F).
If the device is started up at a temperature of less than 20 °C (68 °F), the nominal
output will not be available until the required process temperature is reached.
If the device is operated at high ambient temperatures, or with inadequate heat dissipa-
tion, derating occurs in order to prevent an overload.
The device may only be operated for a maximum of 30 minutes in a temperature range
of 35 °C to 40 °C (95 °F bis 104 °F). Technical factors may cause the energy cell to
switch at higher temperatures despite the derating feature. Premature degradation of
the device can also occur following operation at very high temperatures.
Operation
Safety
Operating condi-
tions
Switching the
energy cell to
standby
