VIII
The user is responsible for the safekeeping of any changes made to the
factory settings. The manufacturer accepts no liability for any deleted
personal settings.
Data protection
Devices with the CE marking satisfy the essential requirements of the
Machinery and EMC Directives. (Further details can be found in the appen-
dix or the chapter entitled „Technical data“ in your documentation).
Safety symbols
Do not dispose of this device with normal domestic waste!
To comply with the European Directive 2002/96/EC on Waste Electrical and
Electronic Equipment and its implementation as national law, electrical
equipment that has reached the end of its life must be collected separately
and returned to an approved recycling facility. Any device that you no longer
require must be returned to your dealer, or find out about the approved
collection and recycling facilities in your area.
Ignoring this European Directive may have potentially adverse affects on the
environment and your health!
Disposal
The device has been tested at the manufacturer’s voluntary request by TÜV
SÜD for compliance with the requirements of EN 62282-5-1 and has recei-
ved the marks of conformity for product safety.
Marks of confor-
mity
The operator is required to carry out a safety inspection of the unit at least once every
12 months, and to have the safety elements on the unit function tested, including
calibration of the sensors. The entire system must be checked in accordance with the
applicable national regulations.
Follow the appropriate national and international standards and directives when che-
cking the safety of the entire system.
Maintenance, technical inspections and checks must only be carried out by qualified
personnel (service organisations) who have been trained in the safety and maintenance
of these devices. In addition, all repair and maintenance work must be performed
exclusively using original replacement parts. All changes to the device and the use of
parts that are not original replacement parts may only be made with the approval of the
manufacturer.
If these conditions are not met, the manufacturer cannot guarantee the safety of the
device. Starting up the device without having performed safety-related maintenance
work is done at your own risk.
The manufacturer therefore accepts no liability for damage caused by inadequate
maintenance carried out by a third party or by the non-performance of maintenance.
Carrying out a
safety inspection
(continued)