37
EN
To call up any measured value:
1. Select the „SETUP“ button from the Favourites
display
2. Press the „OK“ key to confirm
At the end of the „Display“ section there is an overview and explanation of the available
measured values.
3. Select the required symbol, e.g. „H
2
/=“ for the
energy cell.
4. Press the „OK“ key to confirm
5. Select the required symbol, e.g. „COOLSYS“ for the
cooling system temperatures.
6. Press the „OK“ key to confirm
7. Select the required display value, e.g. „TAout“ for
the temperature of the process outgoing air in °C.
The following changes to the display are possible:
-
Changing the Favourites display:
Overview with an individual selection and arrangement of 4 measured values from
all the available measured values
-
Configuration of the external analogue sensor inputs:
Setting the display format (number of decimal places) and unit for the sensor
measured values
-
Configuration of tank indicator:
Used to set the tank volume, maximum tank pressure and sensor signals for cor-
rectly displaying the store of hydrogen
Displaying
measured values
Configuration
