It is forbidden to duplicate this manual or parts of it in any way or any form without written permission of the author © 2003
FROMM
FS 270 series
MAINTENANCE INSTRUCTIONS FOR OPERATORS
SAFETY!
-
First switch off the main switch and lock it before carrying out maintenance on the installation.
-
Take care, that other persons cannot put the installation in action.
-
Take care, that the protection covers, etc. are remounted when putting the installation in action again.
The installation will have a long operational life due to preventive maintenance. This means, that the
various parts of the installation have to be monitored on a weekly, monthly, semi-annually or annually
schedule.
The operational lifetime is influenced by the environmental conditions. The indicated maintenance
frequency is valid for normal operation conditions (8 hrs per day, 20
°
C, clean environment).
One is advised to increase the maintenance frequency under more severe conditions.
Keep rotating parts free from dirt.
REMAINDER OF THE FILM
The machine has to be cleaned every day
Never use solvents to clean the machine. To remove dust or particles deposited during the size
changeover operations, never use compressed air: only use rags and aspirators.
Check if any film and packaging remainder are present in the brake system and remove it.
Weekly maintenance
-
Check that the shaft chain is taut by means of the chain tightener
-
Check the tension of the chain that moves the turnplate; if need be adjust the chain tightener by
means of the screws
Monthly maintenance
- grease the shaft chain and the corresponding slide guides
- grease the chain that moves the turnplate
MAINTENANCE INSTRUCTIONS
34
