It is forbidden to duplicate this manual or parts of it in any way or any form without written permission of the author © 2003
FROMM
FS 270 series
AL 5 FILM TEARING ALARM (Option 16.8242)
The arrised problem
Possible remidies
This alarm indicates that the non-work time set for
the rubber pin (
1
) has elapsed due to:
Film roll finished
- Replace the roll
- Film tearing
- Restore the film
- Card (
2
) not working
- Replace the card
Should the problem persist, contact the Customer After-Sales Service of MANUFACTURER
COUNT SENSOR FOR CARRIAGE PHONIC WHEEL
The arrised problem
Possible remidies
-Phonic wheel sensor incorrectly positioned
- Check for the correct positioning of the
sensor as compared to the phonic wheel
The distance should not be more than 2mm
- Sensor not connected properly
- Check for the correct connection of the
sensor by means of the associated
connector
- Sensor not working properly
- Replace the sensor
Should the problem persist, contact the Customer After-Sales Service of MANUFACTURER
ALARMS AND E
R
RORS
1
2
32