Operating the system
Filling/ refilling the store with fuel
Page 18
B 067 00 09
v
3
3.2.2
Loading wood chips in an empty store
CAUTION! If the head of the stirrer is already free of material
and the arms / spring blades are extended, then the feeder
unit must be active during the filling process.
Press and hold this button for 5 seconds
“Extra heating” mode is activated
Load a small quantity of wood chips and wait at least half an hour
(preferably an hour) until the arms / spring blades are touching the
head of the stirrer
Only then should you load the remaining material
3.2.3
Blowing in pellets for a store with pellet screw
For systems with a pellet screw, the boiler must be in “OFF” status when
the store is filled. The under-pressure from the blowing could bring
smoke back into the store.
Switch off the boiler by pressing the
button for 5 seconds and
allow it to cool down for at least two hours.
Close all openings to the store to seal out dust
Blow the fuel into the store
